Loading Paper Manually - Epson Stylus COLOR 3000 User Manual

Note:
Do not load more than 30 sheets of oversized paper into the sheet
feeder. Also do not load paper above the red line on the right edge
guide, which is located on the inside surface of the edge guide.
Otherwise, a paper jam may occur.
The maximum width of paper you can load is 432 mm. Load
Super A3/B, A2, and US C size paper short edge first.

Loading paper manually

You can load single sheets of paper from the manual feed slot
without removing the paper supply from the sheet feeder. This
slot can accommodate single sheets of paper from 105 mm
(4.1 inches) to 432 mm (17 inches) wide.
When you load paper manually, you can adjust the loading
position using the micro-adjust mode. See "Adjusting the
loading position" on page 5-9.
Note:
If you plan to print on banner paper, see "EPSON banner paper" on
page 5-31.
Follow these steps to load a single sheet in the manual feed slot:
1. Turn on the printer. Make sure that the paper-release lever is
set to the single sheet position.
5-6
Paper Handling