Epson Stylus COLOR 300 User Manual
Epson Stylus COLOR 300 User Manual

Epson Stylus COLOR 300 User Manual

Epson user guide printer color 300
Hide thumbs Also See for Stylus COLOR 300:
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for Epson Stylus COLOR 300

  • Page 2: Where To Find Information

    Where to Find Information This User’s Guide Provides you with information on using your EPSON Stylus COLOR 300 and consumable products, from setting up to troubleshooting. Online Help Provides you with detailed information and instructions on the Windows printer software that controls your printer. Online help will be automatically installed when you install the printer software.
  • Page 3 The information contained herein is designed only for use with this EPSON printer. EPSON is not responsible for any use of this information as applied to other printers. Neither SEIKO EPSON CORP. nor its affiliates shall be liable to the purchaser of this...
  • Page 4: Declaration Of Conformity

    Model: Conforms to the following Directive(s) and Norm(s): Directive 89/336/EEC: Directive 73/23/EEC: June 1997 M. Hamamoto President of EPSON EUROPE B.V. SEIKO EPSON CORPORATION 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392 Japan EPSON EUROPE B.V. Prof. J. H. Bavincklaan 5 1183...
  • Page 5: Table Of Contents

    Using a printer stand ..... . 2-4 Plugging in the Printer ..... . . 2-5 Installing the Ink Cartridge Connecting the Printer to Your PC .
  • Page 6 Cleaning the Printer Transporting the Printer ..... . . 5-10 ..... 4-3 .
  • Page 7 Error indicators ......6-2 Printer operation check ..... 6-3 Problems and Solutions .
  • Page 9: Safety Information

    Read all of these instructions and save them for later reference. Follow all warnings and instructions marked on the printer. Do not place the printer on an unstable surface or near a radiator or heat source. Place the printer on a flat surface. The printer will not operate properly if it is tilted or at an angle.
  • Page 10: A Few Precautions

    Even if you are familiar with other types of printers, be sure to read through the following list of precautions before operating your ink jet printer. Do not put your hand inside the printer or touch the ink cartridge during printing. Do not move the print head by hand; otherwise you may damage the printer.
  • Page 11 Do not unplug the printer or turn off the power to the outlet until the power light stops flashing. The printer caps the print head when no data is received for several seconds.
  • Page 12: Energy Star Compliance

    For United Kingdom Users Use of options EPSON (UK) Limited shall not be liable against any damages or problems arising from the use of any options or consumable products other than those designated as Original EPSON Products or EPSON Approved Products by EPSON (UK) Limited.
  • Page 13: Warnings, Cautions, And Notes

    Replace fuses only with a fuse of the correct size and rating. Warnings, Cautions, and Notes Warnings must be followed carefully to avoid bodily injury. Cautions must be observed to avoid damage to your equipment. Notes contain important information and useful tips on the operation of your printer. Safety Information...
  • Page 14 Safety Information...
  • Page 15: Getting To Know Your Printer

    Getting to Know Your Printer Printer Parts and Control Panel Functions ... . System Requirements ......
  • Page 16: Printer Parts And Control Panel Functions

    Printer Parts and Control Panel Functions paper support edge guides left edge guide lock lever sheet feeder adjust lever Getting to Know Your Printer paper out ink out light power light light ink cartridge clamp paper thickness lever power switch...
  • Page 17 Performs print head cleaning if pressed for 3 seconds when the Lights The lights turn on or flash to indicate the printer status. Printer Status Printer is on. Receiving data, replacing an ink cartridge, charging ink, or cleaning the print head.
  • Page 18: System Requirements

    80386/25 MHz processor 16MB RAM 20MB hard disk space VGA monitor EPSON Answers To use the EPSON Answers online guide included with your printer software, your system should also meet the following requirements: ® -compatible PC with a 486, 586, or Pentium...
  • Page 19: Options And Consumable Products

    Options and Consumable Products Interface cables EPSON supplies several types of interface cables. You can use any interface cable that meets the specifications listed below. See your computer manual for any additional requirements. Parallel Interface Cable (shielded) C83602 from D-SUB...
  • Page 20 EPSON Photo Quality Glossy Paper (Letter) EPSON Ink Jet Transparencies (A4) EPSON Ink Jet Transparencies (Letter) EPSON Photo Quality Self Adhesive Sheet (A4) S041106 EPSON Photo Paper (4 x 6 in.) Note: The availability of special media varies by country.
  • Page 21: Setting Up The Printer

    Using a printer stand ..... . Plugging in the Printer ..... . .
  • Page 22: Unpacking The Printer

    Unpacking the Printer Your printer box should include a CD-ROM, which includes the printer software that runs your printer, and the following items: ink cartridge Remove all protective materials packed with your printer before you set it up and turn on the power. Follow the instructions inserted with the printer to remove these materials.
  • Page 23: Attaching The Paper Support

    Place the printer close enough to the computer for the interface cable to reach it easily. Leave enough room on the table at the front of the printer for the paper to flow freely out of it. Leave adequate room for easy operation and maintenance.
  • Page 24: Using A Printer Stand

    Avoid places subject to shocks and vibrations. Place the printer near a wall outlet where the plug can be easily unplugged. Note for French-speaking users: Placez l’imprimante près d’une prise de contacte où la fiche peut être débranchée facilement. Avoid electrical outlets controlled by wall switches or automatic timers.
  • Page 25: Plugging In The Printer

    Plugging in the Printer 1. Make sure that the printer is turned off. 2. Check the label on the back of the printer to make sure the voltage required by the printer matches that of the electrical outlet you will be plugging it into. Also, make sure that you have the correct power cable for your power source.
  • Page 26: Installing The Ink Cartridge

    Note: Do not open the ink cartridge package until just before you install the cartridge, or the ink may dry up. 1. Turn on the printer. The P power light and the light come on. Setting Up the Printer ink out...
  • Page 27 Caution: Do not move the print head by hand. Always use the cleaning button to move it. Otherwise you may damage the printer. 3. Holding both sides of the cover, open the printer cover. Setting Up the Printer...
  • Page 28 Do not remove the whole tape seal (especially the white portion) from the top of the cartridge. Remove only the yellow portion. Do not remove the tape seal from the bottom of the cartridge; otherwise, ink will leak. Setting Up the Printer (S020138)
  • Page 29 7. Press the ink cartridge clamp down until it locks in place. Caution: Once you install the ink cartridge, do not open the clamp again until you replace the ink cartridge. Otherwise, the cartridge may become unusable. Setting Up the Printer...
  • Page 30 Caution: During the ink charging process, the P power light flashes. Never turn off the printer while the P power light is flashing. Doing so can result in incomplete charging of printer ink. 9. Close the printer cover.
  • Page 31: Connecting The Printer To Your Pc

    Connect the printer to the computer as follows: 1. Make sure both the printer and computer are turned off. 2. Plug the cable connector securely into the printer’s interface connector. Then squeeze the wire clips together until they lock in place on both sides.
  • Page 32: Installing The Printer Software

    See the booklet packed with the CD-ROM for more information. EPSON Answers is not included in the floppy disk version. If you are using the floppy disk version of the software, before you begin installation, make a backup copy of the EPSON printer software disk.
  • Page 33: Installing The Software For Windows 95

    Installing the software for Windows 95 If you are using Windows 3.1, see page 2-19 for instructions. 1. Make sure Windows 95 is running and the printer is off. 2. For CD-ROM users: Insert the printer software CD shipped with your printer in the CD-ROM drive.
  • Page 34 3. Select your printer icon in the EPSON Printer Utility Setup dialog box. Click OK to start the installation and follow the on-screen instructions. Note: Installation time varies depending on your computer system. For CD-ROM users: EPSON Answers installation begins automatically once the printer driver and utilities are installed.
  • Page 35 2. Turn off your printer and computer, if necessary. 3. Turn on the printer first; then turn on the computer. Your computer begins loading Windows 95. 4. If you defined a password, enter it at the prompt. You see the New Hardware Found screen.
  • Page 36 OK. Otherwise, change the drive letter in the Copy manufacturer’s files from box and click OK. 8. At the next screen, you can type a unique name for the printer in the Printer name box. We recommend that you keep the model name as shown.
  • Page 37 If you use your printer on a network with Windows 95, see the next section. Using your printer on a network with Windows 95 To print over a network, you need to set up your printer as a remote printer. Follow these steps: 1. Double-click the My Computer icon.
  • Page 38 Click OK. 6. After you have made your settings on the Details menu, click Start, point to Programs and Epson, then click Spool Manager4. The Spool Manager window opens. 7. Select your printer, click the Queue menu, then click Setup.
  • Page 39: Installing The Software For Windows 3.1

    CD-ROM, type EPSETUP instead of SETUP. In the dialog box that appears, click the Driver disk creation utility button and follow the on-screen instructions. 4. Click OK. Select your printer icon in the EPSON Printer Utility Setup dialog box. 2-19...
  • Page 40 5. Click OK to start installation and follow the on-screen instructions. For CD-ROM users: EPSON Answers installation begins automatically once the printer driver and utilities are installed. Follow the on-screen instructions. For floppy disk users: Click OK when the installation of the printer driver and utilities is completed.
  • Page 41 ......Accessing the Printer Software From Windows applications ....
  • Page 42: Loading Plain Paper

    Loading Plain Paper The following procedure describes how to load plain paper in the printer. You can also print on ink jet paper, transparencies, index cards, photo-quality glossy paper/film, photo paper, envelopes, and adhesive sheets. For instructions on using special media, see Chapter 4, “Printing on Special Paper.”...
  • Page 43 2. Push down the left edge guide lock lever and slide the left edge guide to the left as far as it will go. 3. Load a stack of paper with the printable surface up and the right edge of the paper resting against the right side of the sheet feeder.
  • Page 44 6. While holding the printable side of the paper toward you, insert it gently straight up and down into the printer. Then rest the paper against the paper support. This step ensures that the paper is properly loaded in the paper path.
  • Page 45: Accessing The Printer Software

    You may need to click a combination of these buttons. The Main and Paper menus contain the printer driver settings. The Utility menu contains the printer utilities. Click the tabs at the top of the menus to open them. For information on the printer driver settings, see online help.
  • Page 46: From Windows 95

    2. Double-click the Printers icon. 3. Choose your printer from the Installed Printers list. 4. Choose Setup. You see the Main menu of the printer software window. The Main and Paper menus contain the printer driver settings. The Utility menu contains the printer utilities.
  • Page 47: Getting Information Through Online Help

    What’s This? prompt. From Windows 95 To access online help directly from Start, click the Start button, point to Programs and Epson, and then click EPSON Stylus COLOR 300 Help. You see the help contents window. Starting to Print...
  • Page 48: From Windows 3.1

    From Windows 3.1 To access online help directly from Program Manager, open the EPSON program group and click the EPSON Stylus COLOR 300 Help icon. You see the help contents window. Starting to Print...
  • Page 49: Chapter 4 Printing On Special Paper

    Chapter 4 Printing on Special Paper Setting the Paper Thickness and Adjust Levers ..Setting the paper thickness lever ....Setting the adjust lever .
  • Page 50: Setting The Paper Thickness And Adjust Levers

    Before you start printing on special paper, you may need to change the paper thickness lever and the adjust lever settings. Note: When changing these settings, make sure the printer is paused and no paper is in the sheet feeder or the paper path. Setting the paper thickness lever The paper thickness lever has two settings: plain paper and thick paper.
  • Page 51: Setting The Adjust Lever

    When you print on thick paper such as envelopes or if ink smears on your documents, set the adjust lever to the “+” position. To change the setting, open the printer cover and position the lever as shown below. Lever Position...
  • Page 52: Loading Special Paper And Other Media

    EPSON ink jet printers. EPSON recommends you to use media distributed by EPSON to ensure high-quality results. For a list of EPSON special media, see page 1-6, or “Printing Supplies” in online help. When loading special paper distributed by EPSON, read the...
  • Page 53 Loading capacity for special media is explained below. EPSON 360 dpi Ink Jet Paper and Photo Quality Ink Jet Paper EPSON Photo Quality Ink Jet Cards EPSON Photo Quality Glossy Paper EPSON Photo Quality Glossy Film EPSON Ink Jet Transparencies...
  • Page 54: Loading Envelopes

    Do not use envelopes that are curled or folded. Also avoid using envelopes that are too thin; they may curl during printing. Select Plain Paper as the Media Type setting in the printer driver. For more details on making printer driver settings, see online help.
  • Page 55 Aligning the Print Head ..... . Cleaning the Printer ......
  • Page 56: Replacing The Ink Cartridge

    If you need to replace the ink cartridge with a new one before the ink out light flashes, see “Fixing Ink Cartridge Problems” on page 6-22. EPSON recommends the use of genuine EPSON ink cartridges. Other products not manufactured by EPSON may cause damage to your printer not covered by EPSON’s warranties.
  • Page 57 Otherwise you may damage the printer. Note: If you press the ink out light is off, the printer starts cleaning the print head. The print head automatically returns to the home (far right) position after about 60 seconds if you don’t begin the installation procedure.
  • Page 58 5. Lift the cartridge out of the printer and dispose of it properly. Do not take the used cartridge apart or try to refill it. Warning: If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water.
  • Page 59 Caution: The P power light continues to flash while the printer performs the ink charging operation. Never turn off the printer while the P power light is flashing. Doing so can result in incomplete charging of printer ink. Note: Even if you do not press the moves the print head back to its home position about 60 seconds after you replace the ink cartridge.
  • Page 60: Cleaning The Print Head

    You can clean the print head from your computer with the Head Cleaning utility in the printer software, or from the printer itself by using the printer’s control panel buttons. Note: Print head cleaning uses ink.
  • Page 61 T cleaning button to return the print head to its home position. 2. Hold down the cleaning button for three seconds. The printer starts cleaning the print head and the P power light begins flashing. Caution: This operation takes about one minute to complete. Never turn off the printer while the P power light is flashing.
  • Page 62: Aligning The Print Head

    A4 size paper loaded short edge first. Otherwise, the print head will spray ink directly onto the platen. 2. Access the printer software as described in Chapter 3, then click the Utility tab at the top of the printer software window.
  • Page 63: Cleaning The Printer

    Cleaning the Printer To keep your printer operating at its best, you should clean it thoroughly several times a year. 1. Make sure the printer is turned off. Then unplug the power cord. 2. Remove any paper from the sheet feeder.
  • Page 64: Transporting The Printer

    1. Open the printer cover and make sure the print head is positioned at the far right of the printer. If not, turn on the printer and wait until the print head returns to the far right position.
  • Page 65 Error indicators ......Printer operation check .....
  • Page 66: Diagnosing The Problem

    Diagnosing the Problem If you find something wrong with your printer, you may be able to solve the problem by: Checking the “Error indicators” (see below) Performing a “Printer operation check” (see the next page) Applying the recommended solutions on the “Problems and Solutions”...
  • Page 67: Printer Operation Check

    To perform a printer operation check, follow these steps: 1. Make sure both the printer and computer are turned off. 2. Unlock the wire clips on both sides of the interface connector and remove the ground connector, if necessary.
  • Page 68 The printer prints an operation check page including the version of your printer’s ROM, the ink counter code, and a nozzle check pattern. Here is a typical printout: The above sample is in black and white, but the actual test prints in color (CMYK).
  • Page 69: Problems And Solutions

    5. Turn off the printer after it finishes printing one page. If the operation check page results appear as shown in step 4, this means that the printer itself is all right and that the problem probably lies in the printer software settings, application settings, the interface cable, or the computer itself.
  • Page 70: Power Supply

    Cause The printer’s voltage rating does not match the voltage of your electrical outlet. The printer does not work and the control panel lights are off. Cause The printer is turned off. The electrical outlet is controlled by an outside switch or automatic timer.
  • Page 71: Operation

    6-3. Use an interface cable that meets both printer and computer specifications. See page 1-5. Make sure that your printer is selected in your software. If you cannot select your printer, install or reinstall the printer software as described in Chapter 2.
  • Page 72 Select Use Print Manager for this port in the Queue Setup window. To access this window, double-click the EPSON Spool Manager4 icon in the EPSON folder and select Setup from the Queue menu. Try reducing the image resolution of your document in your image-editing software.
  • Page 73 Color documents print out in black and white. Cause Your printer is not selected in your software. Color printing is not selected in your application or in the printer driver. For Windows 95, choose a lower resolution setting as the Color Palette setting.
  • Page 74 Printing starts too high or too low on the page. Cause Margins are set incorrectly in your application. The size of the paper loaded in the printer does not match the paper size setting within your application. Print speed is not what you expect. Cause...
  • Page 75 What to do Make sure Use Print Manager for this port is not checked. Click the Start button, point to Programs, point to Epson, and click Spool Manager4. Then click Setup on the Queue menu in the EPSON Spool Manager window.
  • Page 76: Paper Handling

    See “Loading Paper” in Chapter 3. Turn off the printer and gently pull all of the paper out of the printer. If it tears and pieces remain inside the printer, open the printer cover; then remove any remaining pieces of paper.
  • Page 77 The printer loads more than one sheet at a time. Cause The paper may have been loaded too deeply into the printer. Too many sheets are loaded in the sheet feeder. The edge guides are not set correctly. The paper thickness lever or the adjust lever position may not be set correctly.
  • Page 78 Troubleshooting What to do Press the load/eject button to eject the paper. Use paper that meets the paper requirements for this printer. See “Paper” in the Appendix. What to do Fan the stack of paper and straighten it before loading.
  • Page 79: Printing Quality

    Main menu and make sure the Media Type setting is appropriate for the type of paper loaded in the printer. See online help. To access online help, see page 3-7. What to do Do not store your paper in a damp or humid environment.
  • Page 80 Special paper was loaded without the support sheet or a regular sheet of paper under it. Multiple sheets of EPSON Photo Quality Glossy Film are loaded. Ink has leaked on the platen. 6-16 Troubleshooting...
  • Page 81 See page 5-2. Make sure the Media Type setting matches the type of paper loaded in the printer. See online help. To access online help, see page 3-7. What to do Align the print head. See page 5-8.
  • Page 82 6-18 Troubleshooting What to do Make sure you load the correct paper in the printer and that you select the same media type in your application and/or the printer driver. For information on Media Type settings in the printer driver, see online help.
  • Page 83 See the user’s guides of your image-editing software and your monitor for information on calibrating your system for color matching. See online help or the EPSON Answers CD-ROM for color printing information. What to do Make sure that you are printing on the coated side of the paper.
  • Page 84 Color dots are missing in printed characters or graphics. The printed color image has gaps or faint areas. Cause The color print head nozzles are clogged. Black dots are missing in printed characters or graphics. The printed black image has gaps or faint areas. Cause The black print head nozzles are clogged.
  • Page 85: Increasing The Print Speed

    For this reason, it is important to be selective in your use of color if you also require a faster print speed. The following table shows the factors that inversely affect print speed and print quality (increasing one will decrease the other). Printer driver settings Print Quality High Speed Halftoning...
  • Page 86: Fixing Ink Cartridge Problems

    Once you remove an ink cartridge, it becomes unusable and cannot be reinstalled even if ink remains. Otherwise, it may damage the printer or cause the ink level sensor to malfunction. 1. Make sure the printer is on, then open the printer cover. 6-22 Troubleshooting...
  • Page 87 Caution: The P power light continues to flash while the printer performs the ink charging operation. Never turn off the printer while the P power light is flashing. Doing so can result in incomplete charging of ink.
  • Page 88: Contacting Customer Support

    For United Kingdom and the Republic of Ireland users If you purchased your printer in the UK or the Republic of Ireland, Epson (UK) Limited provides a range of customer services and technical support. Note: For customers in the Republic of Ireland, please use the correct dialing codes when dialing the UK telephone numbers listed in the following sections.
  • Page 89 The enquiry desk team can be contacted by calling 0800 220546 in the UK or 1 800 409132 from the Republic of Ireland, by faxing 01442 227271, and via the Internet at info@epson.co.uk. They can provide the following information: Information and literature on new EPSON products (also...
  • Page 90: For Australian Users

    You will be asked to follow a simple routine to register your document request, and once you have entered your telephone and fax numbers, Faxon Epson will fax a copy of the document catalogue to your fax machine. When you have found the documents that you need in the catalogue, call Faxon Epson again and enter the document ID numbers.
  • Page 91 EPSON Helpdesk EPSON Helpdesk is provided as a final backup to make sure our clients have access to advice. Operators on the Helpdesk can aid you in diagnosing hardware and software problems.
  • Page 92: For Singapore Users

    The more information you prepare, the faster we can help solve the problem. This information includes the user’s guide for your EPSON product, type of computer, operating system, application programs, and any other information you feel is required.
  • Page 93: For Philippines Users

    Internet home page EPSON Hong Kong has established a local home page in both Chinese and English on the Internet to provide users with the following information: Product information Answers to Frequently Asked Questions (FAQs) Latest versions of EPSON printer drivers Users can access our World Wide Web home page at: http://www.epson.com.hk.
  • Page 94 6-30 Troubleshooting...
  • Page 95: Appendix

    Appendix Printer Specifications Printing ....... . Paper ....... . .
  • Page 96: Printing

    Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON can not attest to the quality of any non-EPSON brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
  • Page 97 45 g/m (12 lb) to 90 g/m (24 lb) A6 (105 mm 148 mm) Special papers distributed by EPSON A4 (210 mm 297 mm) Letter (216 mm 279 mm) A6 (105 mm 148 mm) Glossy film only Special papers distributed by EPSON...
  • Page 98: Printable Area

    Envelopes A: The minimum top margin is 3.0 mm (0.12 inch). When loading multiple sheets of EPSON Photo Quality Glossy Film, the minimum top margin is 30 mm (1.2 inches). B: The minimum left margin is 3.0 mm (0.12 inch).
  • Page 99: Ink Cartridge (S020138

    ** It thaws and is usable after approximately 3 hours at 25°C (77°F). Caution: EPSON recommends the use of original EPSON ink cartridges only. Other products not manufactured by EPSON may cause damage to your printer not covered by EPSON’s warranties.
  • Page 100: Mechanical

    Rated frequency range Input frequency range Rated current Power consumption Note: Check the label on the back of the printer for the voltage of your printer. Printer Specifications Friction Sheet feeder, rear entry About 100 sheets at 64 g/m Storage Width: 396.7 mm (15.6 inches)
  • Page 101: Environmental

    UL 1950 with D3, CSA C22.2 No.950 with EN60950 (TÜV and NEMKO) FCC part 15 subpart B class B, CSA C108.8 class B EN 55022 (CISPR Pub. 22) class B EN 50082-1 EN 61000-3-2 EN 61000-3-3 AS/NZS 3548 class B Printer Specifications...
  • Page 102 Printer Specifications...
  • Page 103: Glossary

    Printing in which the print heads print in both directions. This increases the speed of printing. A binary digit (0 or 1), which is the smallest unit of information used by a printer or computer. brightness The lightness or darkness of an image.
  • Page 104 A software program that sends instructions to a computer peripheral to tell it what to do. For example, your printer driver accepts print data from your word processor application and sends instructions to the printer on how to print this data.
  • Page 105 See interface. printable area The area of a page on which the printer can print. It is smaller than the physical size of the page due to margins. printer driver A software program that sends commands for using the features of a particular printer.
  • Page 106 The first step in printing. The printer driver converts the print data into codes that your printer understands. This data is then sent to the printer directly or to the print server. spool manager The software program that converts print data into codes that your printer understands.
  • Page 107 EPSON OVERSEAS MARKETING LOCATIONS EPSON AMERICA, INC. 20770 Madrona Ave. P.O. Box 2842 Torrance, CA 90509-2842 Phone: (800) 922-8911 Fax: (310) 782-5220 EPSON DEUTSCHLAND GmbH Zülpicher Straße 6, 40549 Düsseldorf Germany Phone: (0211) 56030 Telex: 8584786 EPSON AUSTRALIA PTY. LTD.
  • Page 109 NOTE: To prevent damage during shipping, several pieces of blue protective material are packed with your printer. You must remove these before you assemble your printer. HINWEIS: Zur Vermeidung von Transportschaden ist der Drucker durch schützende Verpackungsteile (blaufarbig) gesichert. Diese Teile müssen vor dem Zusammenbau des Druckers entfernt werden.
  • Page 110 Ne mettez jamais l’imprimante hors tension tant que le voyant Marche/Arrêt clignote sinon vows utitiserez plus d’encre que nécessaire. Veuillez toujours consulter et suivre les consignes de chargement d’encre du manuel d’utilisation de votre imprimante. Copyright © 1997 by SEIKO EPSON CORPORATION, Nagano, Japan Ink Charging Minutes!
  • Page 111 If you have an EPSON Stylus COLOR 300, follow the instructions on the cleaning sheet for Type 0 printers. If you have an EPSON Stylus COLOR 1520 or an EPSON Stylus COLOR 3000, follow the instructions on the cleaning sheet for Type 0 printers.

This manual is also suitable for:

P870c

Table of Contents