Epson Stylus COLOR 3000 User Manual page 203

The print head nozzles for a
particular color of ink are
clogged.
The ICM (Windows) or
ColorSync (Macintosh)
setting in your driver is not
appropriate for your
document.
Your printer and monitor are
not properly calibrated for
color matching.
Since monitors and printers
produce colors differently,
printed colors will not always
match on-screen colors
perfectly.
Colors are not very vibrant.
Cause
The image was printed on the
wrong side of EPSON Ink Jet
paper.
The Media Type setting in the
printer driver is incorrect.
Clean the color print head as described
in "Cleaning the Print Heads" on page
8-36.
Set the driver to Automatic.
See the user's guides of your
image-editing software and your
monitor for information on calibrating
your system for color matching.
See Appendix A, "Tips for Color
Printing."
What to do
Make sure that you are printing on the
coated side of the paper. If necessary,
flip over the paper and try printing
again. If printing has not improved,
clean the print heads as described later
in this chapter.
Make sure the Media Type setting
matches the type of paper loaded in
the printer. See page 3-13 (Windows)
or 4-8 (Macintosh).
Troubleshooting
8
8-31