System Requirements
When using your printer with a PC
To use your printer, you need Microsoft Windows 3.1,
Windows for Workgroups, Windows 95, Windows NT,
or DOS; a shielded, twisted-pair parallel cable; and:
Minimum system
80386/25 MHz processor
16MB RAM*
20MB hard disk space
VGA monitor
*The amount of required RAM varies depending on your system and the
number and kind of applications you are running. If out of memory errors
occur even though you have the amount of minimum RAM shown above,
close other applications or install more RAM.
Your computer dealer can help you update your system if it
does not meet these requirements.
When using your printer with a Macintosh
The following are the hardware and system requirements that
must be met to use this printer with a Macintosh.
Applicable computer models (as of July 1, 1996)
Macintosh LC II, LC III, LC475, LC520, LC575, LC630
Macintosh IIcx, IIci, IIsi, IIvi, IIvx
Macintosh Quadra Series
Macintosh Centris Series
Macintosh PowerBook
Macintosh PowerBook Duo Series
Macintosh Performa Series
Power Macintosh Series
1-6
Getting to Know Your Printer
Recommended system
Pentium processor
32MB RAM
More than 50MB free hard disk space
VGA or better monitor
Series (excluding PowerBook 100)