HP 53131A/132A 225 MHz Programming Manual page 61

Keyword/Syntax Parameter Form
:SYSTem
:COMMunicate
:SERial
:CONTrol
:DTR IBFull | ON | LIMit
:TRANsmit
:BAUD <numeric_value>
:PACE XON | NONE
:PARity
[:TYPE] EVEN | ODD | NONE
:ERRor?
:KEY <numeric_value>
:LOG?
:VERSion?
:TRACe
:CATalog?
OFFSET, <numeric_value> [HZ
[:DATA]
| S | DEG]
SCALE, <numeric_value>
[:DATA]
OFFSET
[:DATA]?
SCALE
[:DATA]?
:TRIGger
:COUNt
:AUTO <Boolean>
Chapter 2 Command Summary
Front Panel to SCPI Command Maps
Table 2-2. HP 53131A/132A SCPI Command Summary (Continued)
Programming Guide
Std/ Comments
New
Std Subsystem. Collects the functions that are not
related to instrument performance.
Std Subtree. Collects together configuration of
control/communication interfaces.
Std Subtree. Controls the physical configuration of
the RS- 232C port.
Std Subtree.
Std Sets the usage of the DTR line of the RS-232
port.
Std Subtree. Affects parameters associated with
transmission.
Std Sets the baud rate.
Std Sets the software pacing scheme.
Std Subtree. Controls the parity of the channel.
Std Sets the parity scheme.
Std Query only. Queries the oldest error in the
Error Queue and removes the error from the
queue (first in, first out).
Std Simulates the pressing of a front-panel key.
New Query only. Returns a comma-separated list of
integers representing all of the entries in the
Key Queue.
Std Query only. Returns the SCPI version number
with which the Counter complies.
Std Subsystem.
Std Query only. Returns list of intrinsic constants.
Std Sets the offset value.
Std Sets the scale value.
Std Queries the offset value.
Std Queries the scale value.
Std Subsystem.
Std Subtree.
New Controls the number of measurements to be
made when :INIT[:IMM] is performed.
2-37