HP 53131A/132A 225 MHz Programming Manual page 35

Chapter 2 Command Summary
Front Panel to SCPI Command Maps
Gate & ExtArm Key to SCPI Command Map (Cont.)
1
Freq, Period, Ratio
Auto Arming:
a. [:SENSe]:FREQuency:ARM[:STARt]:SOURce IMMediate
[:SENSe]:FREQuency:ARM:STOP:SOURce IMMediate
Digits Arming:
b. [:SENSe]:FREQuency:ARM[:STARt]:SOURce IMMediate
[:SENSe]:FREQuency:ARM:STOP:SOURce DIGits
c. [:SENSe]:FREQuency:ARM:STOP:DIGits <numeric_value>
Time Arming:
d. [:SENSe]:FREQuency:ARM[:STARt]:SOURce IMMediate
[:SENSe]:FREQuency:ARM:STOP:SOURce TIMer
e. [:SENSe]:FREQuency:ARM:STOP:TIMer <numeric_value>
External Arming:
f. [:SENSe]:FREQuency:ARM[:STARt]:SOURce EXTernal
g. [:SENSe]:FREQuency:ARM[:STARt]:SLOPe POSitive | NEGative
h 1 . [:SENSe]:FREQuency:ARM:STOP:SOURce IMMediate
h 2 . [:SENSe]:FREQuency:ARM:STOP:SOURce EXTernal
[:SENSe]:FREQuency:ARM:STOP:SLOPe POSitive | NEGative
h 3 . [:SENSe]:FREQuency:ARM:STOP:SOURce TIMer
I. [:SENSe]:FREQuency:ARM:STOP:TIMer <numeric_value> [S]
Phase
Auto Arming:
a. [:SENSe]:PHASe:ARM[:STARt]:SOURce IMMediate
External Arming:
b. [:SENSe]:PHASe:ARM[:STARt]:SOURce EXTernal
c. [:SENSe]:PHASe:ARM[:STARt]:SLOPe POSitive | NEGative
Figure 2-4. Gate & ExtArm Key to SCPI Command Map (Part 2 of 6)
Programming Guide 2-11