Microcom 324M Operator's Manual page 172

The following is the list of commands in numeric order:
^A ^D COMMAND
2 Text String Entry Mode: Precedes the text strings that are supplied to the
various fields in the format (Equivalent to ^B).
3 Print Command: Prints a single label or starts the printing of a batch of labels
(Equivalent to ^C).
5 Send Printer Status: (Equivalent to ^E).
7 Download new application or FONTs: With various passwords you can re-
flash the application, the bootloader, or the FONTS.
8 Cycle the cutter: This command makes the cutter cycle once. (^D8<CR>)
11 Print Test Pattern: (Equivalent to ^K).
12 Print Blank Label: (Equivalent to ^L).
XX 20 Bits Per Second: This command changes the serial port communication
speed or Baud rate.
21 Software Switch #1: A non-volatile command used to set the various
functions identified below.
^AB12345678
*******.))) 1 = Enable XON/XOFF ; 0 = Disable
******.)))) 1 = 8 Data Bits ; 0 = 7 Data Bits
*****.))))) 1 = Enable Echo ; 0 = Disable
****.)))))) 1 = Disable Parity (NONE) ; 0 = Enable Parity
***.))))))) 1 = Odd Parity ; 0 = Even Parity
**.)))))))) 1 = Ignore Control Codes ; 0 = Accept
*.)))))))))),
.)))))))))),*
324M/424M Operator's Manual - 880026-1001
^A0^D20 110 bps
^A1^D20 150 bps
^A2^D20 300 bps
^A3^D20 600 bps
^A4^D20 1200 bps
^A5^D20 2400 bps
^A6^D20 4800 bps
^A7^D20 9600 bps
^A8^D20 19200 bps
^A9^D20 38400 bps
^A10^D20 57600 bps
^A11^D20 115200 bps
** Enquiry Responses
00 = Control Codes
10 = Text Equivalent
13-3