Table of Contents
Advertisement
How to delete
Deletion pop-up screen
When
is pressed here, the screen returns to the former one.
3) When
is pressed, deletion is performed.
Once the deletion is performed, the data is not restored.
Cau tion
Be sure to carefully check before pressing
When the number of registered pieces is one, deletion cannot be performed. When you
desire to delete it, perform deletion after creating another No.
Reference
The pattern used in continuous stitching or cycle stitching cannot be deleted.
6-13. Continuous stitching
Impor tant
Standard delivery level of the key lock is "1". When the level of the key lock is the case
other than "0", be sure to change the level to "0" to perform the operation below.
Continuous stitching can sew the different zigzag patterns in combination.
Changeover of the respective patterns can be set with the number of stitches.
Continuous stitching can combine as many as 20 steps and 500 stitches per step can be set. In addition, up to
10 patterns can be registered.
To perform the continuous stitching, it is necessary to register in advance the pattern to be used in each step.
88
5
5
Example) When you desire to create the needle
2-step zigzag stitch
Number of stitches :
1) Register in advance standard zigzag stitch at
4 stitches
2) Set the number of stitches as shown in the table
Standard zigzag
stitchNumber of
stitches : 4 stitches
3-step zigzag stitch
3) When "END" mark
Number of stitches :
4 stitches
1) Press
2) Select pattern No. you
.
entry positions as shown in the figure
below.
pattern 1, 2-step zigzag stitch at pattern 2, and 3-
step zigzag stitch at pattern 3.
below.
No. of step
Pattern No.
1
2
3
registration has been completed.
2 in the copy
and deletion pop-up screen
to display the deletion pop-
up screen.
desire to delete in the
deletion pop-up screen.
5 : Select the pattern to be
deleted with "+" and "–".
Number of stitches
2
4
1
4
3
4
is set to the 4th step,
Advertisement
Table of Contents
