Table of Contents
Advertisement
Sewing shape setting screen
First screen
Second screen
¡ Setting of the zigzag width
Change the zigzag width with +/– of switch 1.
¡ Setting of the position of stitch base line
Change the position of stitch base line with +/– of switch 2.
¡ Setting of the reverse feed amount
Change the reverse feed amount with +/– of switch 3.
Cau tion
Feed amount becomes "0" when the hand switch is pressed.
¡ Setting of the normal feed amount
Change the feed amount with +/– of switch 4.
¡ Display of the second screen
Display the sewing shape setting second screen with switch 5.
¡ Setting of the position of sewing start
Set the position of sewing start with
Position of sewing start, right 1
Position of sewing start, center 2 Position of sewing start, right 2
Free position of sewing start starts from the next needle entry after thread trimming.
Reference
66
1 2 3 4
1 2 3 4 5
6 7
6 7
8
of switch 6.
/
Position of sewing start, center 1
Position of sewing start, left 1
Free position of sewing start
Position of sewing start, left 2
Advertisement
Table of Contents
