Table of Contents
Advertisement
5) When all inputting procedures have been completed, press
When the power source is turned OFF without pressing
Cau tion
to the former one. When you desire to determine the data, be sure to press
6-12. Pattern stitching
Impor tant
Standard delivery level of the key lock is "1". When the level of the key lock is the case
other than "0", be sure to change the level to "0" to perform the operation below.
The respective shapes of straight stitch, standerd zigzag, 2-step zigzag, 3-step zigzag, scallop, blind stitch,
T stitch, patterns 1 to 4 and custom can be registered in the pattern.
Patterns, the zigzag width of which is different from each other, and those, the positions of the stitch base line
of which are different from each other can be changed over and used without re-setting the data even in case
of the same zigzag shape by registering as patterns. Continuous stitching or cycle stitching can be set by using
the registered pattern.
It is possible to register as many as 99 patterns.
(1) Setting the pattern stitching
Example) Scallop stitching
The second screen of the sewing shape list
Pattern selection pop-up screen
1
2
key to determine.
key, the inputted data returns
1) S e l e c t
second screen of the
sewing shape list.
2) P r e s s
c o r r e s p o n d i n g t o t h e
sewing which has been
registered, or the pattern
you desire to edit in the
pattern selection pop-up
screen.
3) Press
s e w i n g s h a p e s e t t i n g
screen.
key.
1 i n t h e
2
s w i t c h
to display the
85
Advertisement
Table of Contents
