Table of Contents
Advertisement
Continuous stitching setting screen
3) Press
to display the continuous stitching setting screen.
4) Zigzag width and position of stitch base line can be set in the continuous stitching setting screen.
3 : Set zigzag width after combining with "+" and "–".
4 : Set the position of stitch base line with "+" and "–".
3 : Select the registered step with "+" and "–".
6 : Pattern No. of the step which is being selected at present is displayed. Editing cannot be performed.
7: Number of stitches of the step which is being selected at present is displayed. Editing cannot be
performed.
5) Press
to move to the continuous stitching edit screen.
Continuous stitching edit screen
6) Select the pattern and set the number of stitches in each step in the continuous stitching edit screen.
8 : Set the step with "+" and "–". As many as 20 steps can be set.
9 : Set the pattern No. with "+" and "–". (Registered pattern only can be set.)
!0 : Sewing shape of the pattern which has been selected at 9 is displayed.
!1 : Set the number of stitches with "+" and "–". As many as 500 stitches can be set.
7) When setting up to the last step is completed, proceed to the next step, press 9 and put END mark
* When the last step is 20, it is not necessary to set "END" mark
8) When all settings have been completed, press
When the power source is turned OFF without pressing
Cau tion
to the former one. When you desire to determine the data, be sure to press
90
3 4 5
6 7
3 4 5
8 9 !0
!1
!1
8 9
.
key to determine.
key, the inputted data returns
.
key.
Advertisement
Table of Contents
