Table of Contents
Advertisement
[Maintenance personnel level]
1) Turn ON the power. When the needle bar is not in the UP position, turn the handwheel to bring the needle
bar to its UP position.
2) Press switch 1 for approximately three seconds to display the information screen.
Information screen (Maintenance personnel level)]
2 : Ver display For the details, refer to the Engineer ' s Manual.
3 : Sewing common data
4 : Function setting Refer to 6-16. Function setting procedure.
5 : Sewing management information
6 : Communication mode
7 : Hook adjusting mode Refer to 8-6. Hook adjusting mode.
8 : Smart media format For the details, refer to the Engineer's Manual.
(3) Communication mode
The matters below can be performed in the communication mode.
1) Vector form (VDT) data can be registered to non-registered No. of custom pattern from the sewing machine
data server utility (hereinafter called SU-1) or the smart media.
2) Custom pattern can be changed to the vector form and be uploaded to SU-1 or the smart media.
3) Parameter data (EPD) can be overwritten and registered to the condensation custom pattern from SU-1 or
the smart media.
4) Condensation custom pattern can be uploaded to SU-1 or the smart media.
* For setting of the communication with SU-1, refer to the Instruction Manual for SU-1.
Communication setting screen
2 3 4 5 6 7
1
3
2
1
8
6
103
Advertisement
Table of Contents
