Adjusting The Contrast Of The Operation Panel Display; Draining; (Bird's Nest Prevention (Cb) Type Only); Cleaning The Dust Bag (Bird's Nest Prevention (Cb) Type Only) - JUKI LZ-2290A-SR/IP-100D/SC-916 Instruction Manual

Computer-controlled, direct-drive, high-speed, 1-needle, lockstitch, zigzag stitching machine (quick-reverse type)
Table of Contents

Advertisement

9-2. Adjusting the contrast of the operation panel display

2
A
9-3. Draining (Bird's nest prevention (CB) type only)

9-4. Cleaning the dust bag (Bird's nest prevention (CB) type only)

1
134
Light
Shade
1
3
1
1) Press in the direction of arrow mark the click of section
A of cord outlet cover 2 assembled in the rear of
operation panel 1 and remove the cover.
2) Turn LCD screen display brightness adjustment
variable resistor 3 to adjust the brightness (contrast)
of LCD screen.
To prevent the operation panel from
Cau tion
breakage, do not touch the circuit
board pattern and the connector
terminal.
When the regulator becomes filled with water, turn knob
1 for drain counterclockwise.
Periodically clean dust bag 1.
When the dust bag becomes excessively filled
with waste thread, there may be cases where
clamp failure occurs.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lz-2290a-srIp-100dSc-916

Table of Contents