JUKI LZ-2290A-SR/IP-100D/SC-916 Instruction Manual page 18

@1
@3
12
!9
@2
@4
13)-2 Insert white connector 10P cord !9 coming from
the machine head to the rear of the connector
as shown in the figure.
14) Insert black square connector 8P cord @1 coming
from the machine head inside the electrical box
through front cover through hole B, pass it through
cord clamps "e", "f", "h" and "j", and insert the
black square 10P into connector CN72 @2 .
15) Insert black connector 4P cord @3 coming from
the machine head inside the electrical box through
front cover through hole B, pass it through cord
clamps "e", "f", "h" and "j", and insert the black
4P into connector CN73 @4 .
16) Close cord clamps "e", "f" and "j".