Table of Contents
Advertisement
How to lock the cord clamp
4 Lightly press the corner of clamp.
(Cord clamp is locked with a click.)
2
1
[For CE territory]
4-9. Attaching the connecting rod
2
1
14
4
4
3
Clamp
#5
3
A
B
When the insertion of the connector is completed, lock
the cord clamps.
q Take care so that the cord is not caught between
the rear cover and the electrical box main body,
close the rear cover while pressing section A on
the lower side of the rear cover, and tighten four
screws 1.
w Press down cord presser plate C of cord through
hole B of the front cover, press the cord, and tighten
screws 2.
22) Install core clamp #5 supplied as accessories at
the position as shown in the figure.
1) Fix connecting rod 1 to installing hole B of pedal
lever 2 with nut 3.
2) Installing connecting rod 1 to installing hole A will
lengthen the pedal depressing stroke, and the pedal
operation at a medium speed will be easier.
Advertisement
Table of Contents
