Table of Contents
Advertisement
How to delete
Deletion pop-up screen
2 in the copy and deletion of cycle stitching pop-up screen.
1) Press
2) Deletion pop-up screen is displayed.
5 : Select the cycle stitching pattern to be deleted with "+" and "-".
When
is pressed here, the screen returns to the former one without performing deletion.
3) When
is pressed, deletion is performed.
Once deletion is performed, the data is not restored. Be sure to carefully check before
Cau tion
pressing
When the number of registered pieces is one, deletion cannot be performed. When you
desire to delete it, perform deletion after creating another No.
Reference
(4) Teaching
Teaching can input the number of stitches of inputting step with the number of stitches which has been actually
sewn.
1) Press
switch in the cycle stitching edit screen and the teaching mode is obtained.
2) Depress the front part of the pedal to sew until the last stitch of the step is reached.
* At this time, input of the number of stitches cannot be performed by turning the handwheel by hand or using
the needle up/down compensating switch.
3) Stop the sewing machine with the pedal in the neutral position and the number of stitches which has been
sewn is displayed on 1.
1 : Number of stitches which has been sewn can be corrected by hand with "+" and "–".
4) Make the sewing machine perform thread trimming and input of the number of stitches for the step is completed.
(Proceeding to the next step and performing teaching cannot be performed.)
Step returns to "1" with thread trimming motion. When inputting the next step with teaching, re-set the step.
Teaching screen
5
5
.
1
1
95
Advertisement
Table of Contents
