Performing Continuous Stitching; SelectOn Of ContNuous StTchNg Data - JUKI AC-172NN-1790 Instruction Manual

2-13. Performing continuous stitching

Ths sewng machne can perform contnuous sttchng whch s capable of contnuously sewng plural
sewng pattern data wthout lftng the presser foot. It s possble to automatcally sew up to maxmum 6
shapes n one cycle.
In addition, registration of as many as 20 data can be performed. Copy and use the data to fill the needs.
"@-2-10. Copying sewing pattern"
/ Refer to
* It is necessary to change the parts from the state at tht time of your purchase according to the
setting conditions.
(1) Selection of continuous stitching data
2
B
A
1
7
Select continuous stitching.
3
Press ITEM SELECTION key
and dsplayed n order. Cycle data No. and contnuous sttchng data No. whch have been regstered
after the last regstered pattern No. are dsplayed. Here, select the contnuous sttchng data No. whch
you desre to sew.
Perform sewing.
4
Press READY key
LCD dsplay 1 shows green and t s possble to sew. Contnuous sttchng data No. 1 only has been
regstered at the tme of your purchase. However, sewng status cannot be obtaned snce the sewng
pattern has not been nputted. Perform nputtng of sewng pattern referrng to
editing continuous stitching data" p.75
p.71".
!0
!0 , and patterns whch have been regstered are changed over
2 n the state that contnuous sttchng data s selected, and the back-lght of
on the next page.
− 74 −
Set the mode to the input mode.
1
When the back-lght of LCD dsplay 1 shows
the nput mode n blue color, t s possble to se-
lect contnuous sttchng data. When the back-
lght shows the sewng mode n green color,
press READY key
the nput mode.
Call pattern selection screen.
2
Press PATTERN NO. key
selecton screen A s dsplayed.
Pattern No. B whch s selected at present
flashes on and off.
2 to change over to
7 , and pattern
"@-2-13.(2) Method of