Table of Contents
Advertisement
Example) Standard zigzag
Sewing shape setting screen
Programmed stitching selection screen
Press
, in case of more than 10 steps, and programmed stitching selection
screen of "11" to "20" is displayed.
Press
and the screen returns to programmed stitching selection screen of
"01" to "10".
When automatic thread trimming is selected, "0" is not displayed in the last step.
Impor tant
When increasing the number of steps, proceed to the next step after releasing automatic thread
trimming.
Programmed stitching edit screen
4) Set the number of stitches of each step in the programmed stitching edit screen.
3 : Set the step with "+" and "–". As many as 20 steps can be set.
4 : Set the number of stitches with "+" and "–". As many as 500 stitches can be set.
5) When setting of all steps has been completed, select automatic thread trimming 6 at the last step, or set "0"
stitch to the next step.
When the last step is "20", it is not necessary to set "0" stitch at the next step.
6) When setting is completed, press
When the power source is turned OFF without pressing
Cau tion
to the former one. When you desire to determine the data, be sure to press
78
1
1
2
2
3
4
3
4
key to determine the contents of setting.
1) S e l e c t
programmed stitching with
1 of sewing shape setting
screen.
2) Press
programmed stitching
setting screen.
3) Number of stitches of each
step is displayed in the
programmed stitching
setting screen.
Press switch 2 corresponding
to each step and the screen
moves to the programmed
stitching edit screen.
5
6
key, the inputted data returns
s h o w i n g
to display the
key.
Advertisement
Table of Contents
