6-5. Setting the sewing pattern
WARNING :
Be sure to check presser foot and gauge currently being used before sewing after changing the zigzag
pattern or zigzag width. In case where sewing is performed with the presser foot or gauge not matching
the zigzag width, it is in danger of accident such as needle breakage or the like.
(1) Selecting the zigzag pattern
1 When
is pressed, the second screen is displayed.
2 When
is pressed, the first screen is displayed.
Determined pattern
First screen
Continuous stitching
Second screen
Cycle stitching
1) Select the zigzag pattern you desire to sew with the selection switch when the figure above is in the screen.
The determined pattern is displayed in section A.
2) For scallop and blind stitch, select the shape with the next screen.
52
Straight stitch
Standard zigzag
2-step zigzag
Custom pattern
Blind stitch
Scallop
Stitch, left
Stitch, right
Pattern 2
Pattern 3
(fagoting)
3-step zigzag
1
pattern sewing
4
3
Pattern 1
2
Pattern 4