Table of Contents
Advertisement
Second screen
The feed amount cannot be set to 0 and the T stitch
pattern may be deformed due to materials, height
of fed dog or gauges. (2nd stitch does not
Cau tion
correspond with 4th stitch.)
In this case, perform compensation with switch 3
"Setting of the compensation amount of seam
section at feed amount "0"" to make the stitches
correspond with each other.
¡ Setting of the zigzag width
Change the zigzag width with +/– of switch 1.
¡ Setting of the position of stitch base line
Change the position of stitch base line with +/– of switch 2.
¡ Setting of the compensation amount of seam section at feed amount "0"
Change the normal feed amount with +/– of switch 3.
¡ Setting of the normal feed amount
Change the feed amount with +/– of switch 4.
¡ Display of the second screen
Display the sewing shape setting second screen with switch 5.
¡ Setting of the position of sewing start
Set the position of sewing start with
Position of sewing start, left
¡ Setting of the stop position
Set the stop position with
Position of sewing end, left
¡ Display of the first screen
Display the sewing shape setting first screen with switch 8.
6 7
6 7
8
of switch 6.
/
Position of sewing start, left 1
of switch 7.
/
Position of sewing end, left 1
1
Position of sewing start, left 2
Position of sewing end, left 2
1
2
3
2
4
4
Correspondence
Free position of sewing start
Free position of sewing end
3
63
Advertisement
Table of Contents
