Table of Contents
Advertisement
One-shot automatic stitching
One-shot automatic stitching can be set by each step.
1) In the programmed stitching edit screen, press one-shot automatic stitching switch 5 to select the one-shot
automatic stitching. (When it is in the selected state, a mark is displayed on the side of switch 5.)
2) In the step where the one-shot automatic stitching has been selected, the sewing machine will automatically
continue sewing, once the sewing machine starts running, until the number of stitches of the step is reached.
Teaching
Teaching can input the number of stitches of inputting step with the number of stitches which has been actually sewn.
1) Press
switch in the programmed stitching edit screen and the teaching mode is selected.
2) Depress the front part of the pedal to sew until the last stitch of the step is reached.
* At this time, input of number of stitches cannot be performed by turning handwheel by hand or using needle
up/down compensating switch.
3) Stop the sewing machine with the pedal in the neutral position and the number of stitches which has been
sewn is displayed on 2.
1 : Set the step with "+" and "–".
2 : Number of stitches which has been sewn can be corrected by hand with "+" and "–".
4) Make the step of 1 proceed to the subsequent step or make the sewing machine perform thread trimming.
Then the input of the number of stitches for the step is completed.
Teaching screen
6-10. Custom pattern
Impor tant
Standard delivery level of the key lock is "1". When the level of the key lock is the case other than
"0", be sure to change the level to "0" to perform the operation below.
There are cases where the sewing shapes are not stabilized in case of the patterns which frequently repeat
Cau tion
normal and reverse feed stitching. Use the machine at the sewing speed of approximately 2,000 rpm.
There are cases where the value inputted to the operation panel and the actual sewing pitch are different from
each other due to materials and gauges. Perform compensation of the pitch in accordance with the sewing products.
Free needle entry position can be specified and optional zigzag pattern can be created.
As many as 20 patterns can be created and as many as 500 stitches of each pattern can be inputted.
(1) Custom pattern setting
Sewing shape list screen
1
2
1
2
1
1) Press switch 1 of
the sewing shape list
screen.
in
79
Advertisement
Table of Contents
