Table of Contents
Advertisement
* For the reverse feed stitching setting, there are two kinds of methods below according to the zigzag patterns.
1) In case of straight stitch, scallop stitch, blind stitch, custom and continuous stitch, set the reverse feed
stitching with the number of stitches.
Reverse feed stitching at sewing start
Reverse feed stitching at sewing end
* The pictures in case of straight stitching are 1 sewing start
2) In case of standard zigzag, 2-step zigzag and 3-step zigzag, set the reverse feed stitching with the number
of times of zigzag pattern. Zigzag pattern means the space between the returning points of zigzag.
Reverse feed stitching at sewing start
Reverse feed stitching at sewing end
standard zigzag stitch
* Setting of the reverse feed amount of custom pattern stitching or continuous stitching
7 : Transits to the second screen.
Reverse feed stitching setting second screen
9 : Feed amount at the time of automatic reverse feed stitching or pressing the hand switch is set. The
feed amounts from the feed amount set in the pattern setting screen to the reverse feed amount set
here continuously change by pressing down the reverse feed control lever during sewing.
A (feed in normal direction) : 0 to 19 stitches can be set.
B (feed in reverse direction): 0 to 19 stitches can be set.
C (feed in reverse direction): 0 to 19 stitches can be set.
D (feed in normal direction) : 0 to 19 stitches can be set.
A (feed in normal direction) : 0 to 19 times can be set.
B (feed in reverse direction): 0 to 19 times can be set.
C (feed in reverse direction): 0 to 19 times can be set.
D (feed in normal direction) : 0 to 19 times can be set.
1 time
1 time
2 time
2 time
2-step zigzag stitch
9
9
and 4 sewing end
1 time
2 time
3-step zigzag stitch
7
2
3
5
6
.
2
3
5
6
73
Advertisement
Table of Contents
