JUKI LZ-2290A-SR/IP-100D/SC-916 Instruction Manual page 76

¡ Setting of the normal feed amount
Change the feed amount with +/– of switch 4.
¡ Display of the second screen
Display the sewing shape setting second screen with switch 5.
¡ Setting of the position of sewing start
Set the position of sewing start with
Position of sewing start, left 1
Position of sewing start, right 3
Free position of sewing start starts from the next needle entry after thread trimming.
Reference
¡ Setting of the stop position
Set the stop position with
Position of sewing end, left 1
Position of sewing end, right 3
¡ Display of the first screen
Display the sewing shape setting first screen with switch 8.
70
of switch 6.
/
Position of sewing start, left 2
Position of sewing start, left 3
of switch 7.
/
Position of sewing end, left 2
Position of sewing end, left 3
Position of sewing start, right 1
Free position of sewing start
Position of sewing end, right 1
Free position of sewing end
Position of sewing start, right 2
Position of sewing end, right 2