Table of Contents
Advertisement
The second screen of reverse feed stitching setting (2-point condensation)
Press
to display the first screen.
(3) Condensation custom
Condensation custom performs reverse feed stitching with the optional needle entry which has been inputted.
1) Select the shape of condensation with the first screen.
1: Select the shape of condensation at the sewing start.
3 : Select the shape of condensation at the sewing end.
2, 4 : Needle entry position is displayed.
5 : Total display and partial display of the condensation custom pattern are changed over.
2) Set the width of condensation custom pattern with the second screen.
6 : Set the width of condensation custom pattern at the sewing start.
7 : Set the width of condensation custom pattern at the sewing end.
* Separately set inputted zigzag width of condensation custom from that of normal sewing section. Set the width
within the range of maximum zigzag width limitation.
* By setting the width, the needle entry differs from actually inputted needle entry position.
The first screen of reverse feed stitching setting (condensation custom)
Press
to move the screen to the edit screen.
* For the editing procedure, refer to the item of 6-10.Custom pattern.
Press
to display the second screen.
7 8
7 8
1 2
3 4
1 2
5
3 4
5
75
Advertisement
Table of Contents
