Cleaning The Cooling Fan; Cleaning The Hook Section; Cleaning The Rear Cover Of The Control Box; Cleaning The Operation Panel Screen - JUKI LZ-2290A-SR/IP-100D/SC-916 Instruction Manual

Computer-controlled, direct-drive, high-speed, 1-needle, lockstitch, zigzag stitching machine (quick-reverse type)
Table of Contents

Advertisement

9-5. Cleaning the cooling fan installed on the under cover
4

9-6. Cleaning the hook section

9-7. Cleaning the rear cover of the control box

Clean the rear cover when dust or the like gathers on it.

9-8. Cleaning the operation panel screen

Do not wipe the operation panel screen with thinner or strong force.
Lightly wipe the screen with a dry and soft cloth or an alcohol-soaked cloth to clean it.
Cloth waste or the like gathers around the cooling fan
3
filter section installed on the lower part of the under
cover, and there is a case where cooling effect of the
machine head is decreased.
Cau tion
1
2
When cloth waste or the like gathers around or adheres
to the hook section, trouble (defective sewing, seizure
of hook, etc.) of sewing machine will be caused.
Periodically clean the section.
Be sure to install filters 2 and 3 after
they have been completely dried up.
135

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lz-2290a-srIp-100dSc-916

Table of Contents