Table of Contents
Advertisement
1) Press
3 n the copy pop-up screen and the deleton pop-up screen to dsplay the deleton pop-up
screen.
2) Select the pattern No. you desre to delete n the deleton pop-up screen.
7 : Select the pattern to be deleted wth "+" and "–".
When
s pressed here, the screen returns to the former one wthout deletng.
3) When
s pressed, deleton s performed.
once the data is deleted, it does not return to the former one. Be sure to press
carefully checking the data.
When the number of registered pieces is one, deletion cannot be performed. When you
desire to delete it, perform deletion after creating another No.
The custom pattern registered in the pattern cannot be deleted.
6-10. Condensation Custom
Standard delivery level of the key lock is "1". When the level of the key lock is the case
other than "0", be sure to change the level to "0" to perform the operation below.
Condensaton custom can perform condensaton by specfyng free needle entry poston.
Condensaton custom patterns can be created up to as many as 64 steps. As many as 20 patterns can be
regstered at the sewng start and the sewng end respectvely.
(1) Condensation custom setting
■ reverse feed stitching setting (condensation custom) screen
1) Press
to dsplay the reverse feed sttchng settng screen.
2) Select the shape of condensaton n the reverse feed sttchng screen.
1 : Select the shape of condensaton at sewng start from among 1 to 20.
Standard condensaton
changed over and dsplayed n the dsplay secton.
3 : Select the shape of condensaton at sewng end from among 1 to 20.
Standard condensaton
changed over and dsplayed n the dsplay secton.
2 and 4 : Needle entry poston s dsplayed when selectng the condensaton custom.
54
q
w
e
4
q
e
, 2-pont-condensaton
, 2-pont condensaton
and condensaton customs
and condensaton customs
after
to
are
to
are
Advertisement
Table of Contents
