Table of Contents
Advertisement
3-2. Adjusting the contrast of the operation panel display
3-3. Production control switch connecting connector
Light
Shade
1) Press in the direction of arrow mark the click of
section
of cord outlet cover
rear of operation panel
2) Turn LCD screen display brightness adjustment
variable resistor
(contrast) of LCD screen.
1. To prevent the operation panel from
breakage, do not touch the circuit
board pattern and the connector
Cau tion
terminal.
2. Do not disassemble the operation
panel to prevent it from breakage.
1) Press in the direction of arrow mark the click of
section
of cord outlet cover
rear of operation panel
2) Connect the optional relay cable connector to
CN105
of the production control switch
connecting connector.
Note) Prepare the switch main unit by the
customers or ask JUKI business office
about it.
Optional relay cable A (asm.)
JUKI Part No. 40008168
3 2 1
CN105
1
+ 5V
SW
2
GND
3
– 5 –
assembled in the
and remove the cover.
to adjust the brightness
assembled in the
and remove the cover.
Advertisement
Table of Contents
