(2) Adjusting the contrast of the operation panel display
2
A
(3) Production control switch connecting connector
3
2
A
Light
Shade
3
1
1
–6–
) Press in the direction of arrow mark the click of
section A of cord outlet cover 2 assembled in
the rear of operation panel 1 and remove the
cover.
2) Turn LCD screen display brightness adjustment
variable resistor 3 to adjust the brightness
(contrast)ofLCDscreen.
1. To prevent the operation panel from
breakage, do not touch the circuit
board pattern and the connector
terminal.
2. Do not disassemble the operation
panel to prevent it from breakage.
) Press in the direction of arrow mark the click of
section A of cord outlet cover 2 assembled in
the rear of operation panel 1 and remove the
cover.
2) Connect the optional relay cable connector
to CN05 3 of the production control switch
connectingconnector.
Prepare the switch main unit by the
customers or ask JUKI business office
about it.
Optional relay cable A (asm.)
JUKI Part No. 40008168
3 2 1
CN105
+5V
2
SW
3
GND