Installation; Converting A Tabletop Model To A Rackmount Model - HP MSL6000 Series User Manual

2

Installation

This chapter explains how to install an HP StorageWorks MSL Series tape library. Sections in this
chapter include:
• Converting a Tabletop Model to a Rackmount
• Setting Up the Rackmount
• Converting a Rackmount Model to a Tabletop
• Applying Power to the
• Cabling for SCSI
NOTE: Be sure to keep and store all shipping materials from your MSL Series tape library for
potential future use.

Converting a Tabletop Model to a Rackmount Model

To make a tabletop library ready for rack enclosure installation:
1. Remove the rubber feet.
2. Remove the cover.
3. Attach the inner rails to the library using the supplied Allen wrench and screws. Tighten the
screws until snug.
Model, page 30
Library, page 35
Configurations, page 36
Model, page 29
Model, page 34
MSL6000 series tape library user guide 29