Removing and Replacing Components
Removing and Replacing the Cover
Step
3. Slide the left front bezel onto the tab on the chassis until it snaps into place.
Step
4. Install the screw securing the right front bezel to the chassis.
Removing and Replacing the Cover
CAUTION
Do not operate the server without the cover in place. Operation of the server without the cover in place will
result in system failure. Operation of the server without the cover in place will make the server susceptible to
EMI and overheating problems.
Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD safety
precautions could result in damage to the server.
Figure 7-2
Removing and Replacing the Cover
134
OPEN
CLOSED
Intrusion
sensor
Chapter 7