Specifications; Hardware Specifications - HP Integrity rx1600 Operation And Maintenance Manual

9

Specifications

This chapter provides the power requirements, physical requirements, and hardware specifications required for normal
operation of the HP Integrity rx1600.
NOTE For information on operating conditions (environmental requirements), see the hp Integrity rx1600 Site
Preparation Guide included on the HP Server Documentation CD-ROM, or posted under the rx1600 Server at
http://docs.hp.com.

Hardware Specifications

Table 9-1 Hardware Specifications
Micro-processors
Memory
SCSI
LAN
PCI Slots
Core I/O
DVD-ROM
Mass Storage
External Storage
Power Supply
Chapter 9
Intel® Itanium® (up to 2 processors).
1.0 GHz/1.5MB.
Supports up to eight Double Data Rate (DDR) registered ECC Memory, in PC1600 DIMMs.
Supported DDR DIMM sizes: 128MB, 256MB, 513MB, 1GB, and 2GB. Requires DIMMs to
be added in pairs of equal capacity.
Integrated Ultra-3 SCSI dual channel controller; 80 MB/s transfer rate with one internal 68-pin
connector (channel A) and one external 68-pin connector (channel B).
10Mb/100Mb/1Gb LAN (RJ-45) fast ethernet controller; with Wake-on-LAN enabled/disabled
via BIOS setup.
Two 64-bit PCI-X slots, 133 MHz, 3.3V slots. One full slot and one half slot.
One serial port, 2 USB 2.0 ports, integrated 10Mb/100Mb LAN (RJ-45), 2 PCI-X slots, 2 SCSI
channels and 1 IDE bus.
IDE interface; 48x speed.
Maximum internal storage: two 146GB, 10K RPM drives.
Optional.
400W power supply.
181