HP Integrity rx1600 Operation And Maintenance Manual page 78

Utilities
Using the Boot Option Maintenance Menu
Set Auto Boot TimeOut
Use this option to set the amount of time the system pauses before attempting to launch the first item in the Boot Options list.
For example:
Set Auto Boot Timeout. Select an Option
Set Timeout Value
Delete/Disable Timeout
Help
Exit
Interrupting the timeout during the countdown stops the Boot Manager from loading any boot options automatically. If there is
no countdown, boot options must be selected manually.
• To set the auto boot timeout value, in seconds, select Set Timeout Value and enter the desired value.
• To disable the timeout function, select Delete/Disable Timeout.
NOTE When this option is selected, the system does not automatically boot. The system stops at the EFI boot menu
and waits for user input.
Select Active Console Output Devices
Use this option to define the devices that display output from the system console. This list normally includes the VGA monitor
and a serial port for directing output to a terminal emulation package.
NOTE If you install a modem in your system, make sure you disable the modem serial port in both the Active
Console Input and Active Console Output device lists.
NOTE
Some operating systems support multiple consoles, such as a simultaneous serial and VGA output. See your
OS documentation to determine how many consoles are supported with your system. Multiple consoles are
not supported for HP-UX or Windows (use the Smart Setup CD to switch between COM A and the MP on
Windows systems).
For example:
Select the Console Output Device(s)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(PcAnsi)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100)
* Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100+)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(VtUtf8)
Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(PcAnsi)
Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(Vt100)
78
Chapter 5