HP Integrity rx1600 Operation And Maintenance Manual page 20

Controls, Ports and Indicators
Rear Panel
• Optional Management Processor Card LAN
• PCI Slots 1 and 2
Figure 2-5 Rear View
LVD/SE SCSI
Table 2-4 Rear Panel Connectors and Switches
Connector/Switch
AC Power
LVD/SE SCSI
10/100/1000 LAN
10/100 LAN
Serial
USB
ToC
Locator Button and LED
Video (optional)
Serial (optional)
10/100 LAN (optional)
20
Optional
Management Board
Connectors
10/100 Video
Serial
LAN
10/100/1000 10/100
LAN LAN
Primary power connection for the server
68-pin, low-voltage differential, single-ended U320 SCSI. This connector provides external
SCSI connection on SCSI Channel B.
10/100/1000 base-T ethernet LAN connector
10/100 base-T ethernet LAN connector Wake-on-LAN, Alert-on-LAN capabilities
9-pin male serial connector — this is the console connector is the optional management
processor card is not installed.
Two Universal Serial Bus (USB 2.0) connectors
Transfer of Control button. Halts all system processing and I/O activity and restarts the
computer system.
The locator button and LED are used to help locate a server within a rack of servers. When the
button is engaged, the blue LED illuminates and an additional blue LED on the front panel of
the server illuminates. This function may be remotely activated.
15-pin female video connector for the optional management processor card
25-pin female serial data bus connector for the optional management processor card
10 Mb/100 Mb LAN connector for the optional management processor card
AC Power
Receptacle
PCI Slot 1
USB
Serial
PCI Slot 2
ToC
Locator Button
and LED
Function
Chapter 2