Removing And Replacing The Cover - HP Server rx2600 Installation Manual

WARNING
WARNING
WARNING
Important Safety Warnings
Avoiding Electrical Shocks
To avoid electrical shock, do not open the power supplies. There
are no user-serviceable parts inside.
To avoid electrical shock and harm to your eyes by laser light, do
not open the DVD laser module. The laser module should be
serviced by service personnel only. Do not attempt to make any
adjustment to the laser unit. Refer to the label on the DVD for
power requirements and wavelength. This product is a class I
laser product.

Removing and Replacing the Cover

For your safety, never remove the system side cover without first
disconnecting the power cord from the power outlet and
removing any connection to a telecommunications network. If a
Power Protection Device is fitted to your system, you must shut
down your computer using its on/off switch, then remove the
power cord before removing the system's side cover. Remove the
Power Protection Device cables before any servicing operation.
Always replace the side cover before switching the system on
again.
Battery Safety Information
There is a danger of explosion if the battery is incorrectly
installed. For your safety, never attempt to recharge,
disassemble, or burn an old battery. Replace the battery with the
same or equivalent type, as recommended by the manufacturer.
7