Removing And Replacing A Removable Media Drive; Figure 7-38Power Supply Cable - HP Integrity rx1600 Operation And Maintenance Manual

Step 3. Slide the power supply toward the rear of the chassis, engaging the power supply connector with the connector on
the power distribution unit.
Step 4. Connect the power receptacle of the replacement power supply to the rear panel of the chassis.
Step 5. Carefully route the power supply cord from the rear of the chassis at the receptacle to the front of the chassis
through the access slot near the power supply fan unit.

Figure 7-38Power Supply Cable

Step 6. Replace the power supply fan unit into the chassis.
Step 7. Replace the cover.

Removing and Replacing a Removable Media Drive

The removable media drive is located between the two sections of the front bezel.
Chapter 7
Removing and Replacing Components
Removing and Replacing a Removable Media Drive
165