Optional Accessories Specifications - SATO CG2 Series Operator's Manual

6.2 OPTIONAL ACCESSORIES SPECIFICATIONS

CUTTER SPECIFICATIONS
Media Type
Media Size
Thickness
Dimensions
Weight
DISPENSER SPECIFICATIONS
Media Type
Media Size
Thickness
Sensor Type
Dimensions
Weight
CG2 Series Operator Manual
Non-adhesive paper and Label
Pitch including liner: 25 to 603 mm (0.98" to 23.74") (For CG208TT/ CG208DT)
Pitch including liner: 25 to 403 mm (0.98" to 15.87") (For CG212TT/ CG212DT)
Width including liner: 15 to 63 mm (0.59" to 2.48")
0.06 to 0.16 mm (0.002 to 0.006 in.)
* Some restrictions may apply to some label types depending on the substrate,
adhesive, paper size, and environment. Refer to SATO representative on the
labels to be used.
* Split liner cannot be used for this model.
* Perforated liner cannot be used for this model.
Width: 12 to 60 mm (0.47" to 2.36")
Width including liner: 15 to 63 mm (0.59" to 2.48")
Pitch: 22 to 100 mm (0.87" to 3.94")
Pitch including liner: 25 to 103 mm (0.98" to 4.06")
0.06 to 0.19 mm (0.0024" to 0.0075")
Section 6: General Specifications
W 108 X D 50 X H 98 mm
(W 4.25" X D 1.97" X H 3.86")
0.3 kg (0.66 lbs)
Label only
Dispenser sensor (Reflective)
W 108 X D 35 X H 95 mm
(W 4.25" X D 1.38" X H 3.74")
0.12 kg (0.26 lbs)
Page 6-7