SATO CG2 Series Operator's Manual page 83

7.3 UNIVERSAL SERIAL BUS (USB) INTERFACE (cont'd)
7.3.2 Pin Assignments
Pin No. Description
1
2 -Data(D-)
3 +Data(D+)
4
Notes
• USB interface is supported only by Windows2000/XP/Server2003/Vista/Server2008.
USB connection might fail on some "Windows2000/XP/Server2003/Vista/Server2008" hosts.
Be sure to use the instruction manual of your PC, or consult with the PC (host) manufacturer.
• Recommended length for USB cable is 1m.
• Connect USB type B plug (square form factor) to the printer.
• Device name of USB port should be "Serial number".
For example: CRGY0032
CG2 Series Operator Manual
VBus
GND
Section 7: Interface Specifications
Page 7-7