Optional Accessories - Cutter - SATO CG2 Series Operator's Manual

Section 8: Appendix

8.1 OPTIONAL ACCESSORIES - CUTTER

The cutter should only be installed by SATO qualified servicing personnel.
8.1.1 To route the media when the cutter is installed
Loading of the media for cutter unit is similar to the usual procedure as explained in Section 2.3 Loading
Labels or Tags.
8.1.2 Cut position Adjustment
• Cutting of Labels
The correct cutting position is at the label gap. Cutting
onto the label must be avoided because the label
adhesive that accumulates on the blade will affect cutter
sharpness.
• Cutting Media with Perforation
As for media with perforation, cutting on or in front of
the perforated lines is prohibited. Cutting in those
locations could cause the media to jam and the printer to
malfunction.
The perforated line +1 mm (+0.04") is the cut prohibited
zone (see Figure 1).
The folded perforated line +4 to +25 mm (+0.15" to
+0.98") of fan-folded paper is the cut prohibited zone
(see Figure 2).
Page 8-2
Cut Position
Cut Position
Cut prohibited zone
(1mm, 0.04")
Figure 1
25 mm, 0.98"
4 mm, 0.15"
Figure 2
CG2 Series Operator Manual
Label
Backing paper
Label
Perforated line
Fold perforation