Parts Identification - SATO CG2 Series Operator's Manual

1.3 PARTS IDENTIFICATION

Front view
1
2
3
4
5
Operator panel
1
It consists of two contact buttons and one
two-color (red and green) LED indicator.
Top cover
2
Open this cover to load the media and ribbon.
Cover open/close latch
3
Pull these latches on both sides of the printer
forward to open the Top cover of the printer.
Media ejection slot
4
Opening for media output.
VR3 potentiometer (Offset/ Pitch)
5
This potentiometer adjusts the option (Cutter,
Dispenser, Tear-off) stop position (offset
position).
Pitch position adjustment is also available in
the Pitch adjustment VR mode of Factory
Adjustment mode.
CG2 Series Operator Manual
POWER button
6
Press this button to turn the power on or off.
FEED/LINE button
7
Press this button to select the printer status
(online/ offline) or to feed the paper.
ON LINE (POWER) LED indicator
8
The LED lights green when the printer is online
and blinks green when the printer is offline.
Section 1: Introduction
6
7
8
Page 1-3