GENERAL SPECIFICATIONS
6.1 PRINTER BASIC SPECIFICATIONS
MODEL NAME
PHYSICAL CHARACTERISTICS
Width
Depth
Height
Weight
POWER SUPPLY (AC ADAPTER)
Input Voltage
Output Voltage
Power Consumption
ENVIRONMENTAL (EXCLUDING MEDIA)
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
PRINT
Method
Maximum Speed (selectable)
Resolution
Maximum Print Width
Maximum Print Length
CG2 Series Operator Manual
CG208 DT
CG212 DT
1.5 kg (3.3 lbs.)
100-240 V AC, +/-10%, 50/60 Hz (Full range)
At peak times: 40 Watts / 60 VA (at 30% printing ratio)
During standby: 2.5 Watts / 5.3 VA
* With input power voltage conditions: AC 100 V
30 to 80% RH, Non-condensing
15 to 85% RH, Non-condensing
DT models: Direct Thermal only
2, 3 or 4 Inches/second (Setting: 2, 3, 4)
*Print speed varies depending on the of media used.
8 dots/mm (203
12 dots/mm (305
Dots Per Inch)
Dots Per Inch)
56 mm (2.2")
56 mm (2.2")
600 mm (23.6")
400 mm (15.75")
Section 6: General Specifications
CG208 TT
128 mm (5.04")
235 mm (9.25")
173 mm (6.81")
19 V DC, +/-5%, 3A
0° to 35°C (32 to 95°F)
-10° to 60°C (14 to 140°F)
TT models: Thermal Transfer and Direct
50, 75 or 100 mm/second
8 dots/mm (203
Dots Per Inch)
56 mm (2.2")
600 mm (23.6")
CG212 TT
1.6 kg (3.5 lbs.)
Thermal
12 dots/mm (305
Dots Per Inch)
56 mm (2.2")
400 mm (15.75")
Page 6-1