Printer Language - SATO CG2 Series Operator's Manual

MODEL NAME
MEDIA
(Be sure to use media manufactured or certified by SATO)
Size
Thickness
RIBBON
(Be sure to use ribbon manufactured or certified by SATO)
Wind Direction
Winding Method
Roll Diameter
Core Diameter
Width
PROCESSING
CPU
Flash ROM
RAM

PRINTER LANGUAGE

Standard
INTERFACES
Standard Configurations
User installable Optional Inter-
face Board
CG2 Series Operator Manual
CG208 DT CG212 DT
Non-adhesive paper/ Tag
Continuous Pitch: 9 to 603 mm (0.35" to
23.74")
Width: 15 to 63 mm (0.59"
to 2.48")
Cutter Pitch: 25 to 603 mm (0.98"
to 23.74")
Width: 15 to 63 mm (0.59"
to 2.48")
Tear-off Pitch: 15 to 603 mm (0.59"
to 23.74")
Width: 15 to 63 mm (0.59"
to 2.48")
* The above size may be limited by use conditions, such as type of paper, usage
environment, and application.
* When using the dispenser mode, restrictions apply to the maximum paper length
according to paper installation conditions.
0.06 to 0.19 mm (0.0024" to 0.0075")
* The specification for wrist-band has to be confirmed individually.
__
SATO Barcode Printer Language (SBPL)
Select one of the following. (The factory will provide the unit with the selected
interface.)
1) USB 2.0(Type B) with RS-232C(D-sub 9-pin type) or
2) USB 2.0(Type B) with LAN(10BASE-T/100BASE-TX Automatic Switching)
*The RS-232C connector can be used to connect the printer to a computer or the
Keypad.
Wireless LAN (802.11b/g Auto-switching) interface kit (External)
*Applicable to USB with RS232C model only
Section 6: General Specifications
CG208 TT
Non-adhesive paper/ Tag
Continuous
Cutter
Tear-off
Maximum outer diameter: 38 mm (1.5")
Inner core diameter: 12.7 mm (0.5")
Max. 59mm (2.32")
32 Bit RISC-CPU 133MHz
4 Megabytes
8 Megabytes
CG212 TT
Pitch: 9 to 403 mm (0.35" to
15.87")
Width: 15 to 63 mm (0.59" to
2.48")
Pitch: 25 to 403 mm (0.98"
to 15.87")
Width: 15 to 63 mm (0.59" to
2.48")
Pitch: 15 to 403 mm (0.59"
to 15.87")
Width: 15 to 63 mm (0.59" to
2.48")
Face Out
Paper core
Page 6-3