Fabric Manager Configuration; Automatically Starting The Fabric Manager; Set Default Gateway Ip Window; Subnet Manager Submenu - Qlogic 12000 Series User Manual

3. Click the Gateway address text box.
4. Type in the correct switch default gateway IP address.
5. Click Apply.
NOTE:

Fabric Manager Configuration

NOTE:
This section assumes the user has purchased and activated the embedded
version of the Fabric Manager

Automatically starting the Fabric Manager

To enable the Fabric Manager to automatically start at boot time:
1. From the menu, select Subnet Manager.
The Configuration button is displayed
2. Click Configuration.
The Subnet Manager Configuration window is displayed
D000101-000 E
Figure 1-80 Set Default Gateway IP Window
If the DHCP option is selected, no gateway address is necessary.
Figure 1-81 Subnet Manager Submenu
1–Operations and Administration
Configuration and Monitoring Features
.
(Figure 1-81).
(Figure 1-82).
1-61