Set Field Thresholds; Set Field Thresholds Window - Qlogic 12000 Series User Manual

1–Operations and Administration
Configuration and Monitoring Features

Set Field Thresholds

The Set Field Thresholds window allows the user to set, for a specific
parameter(s), an error message threshold for the cable ports on the switch.
To change error reporting thresholds, do the following:
1. Click on Port Stats.
The Set Field Thresholds button is displayed
2. Click on Set Field Thresholds.
The Set Field Thresholds window is displayed
3. To change a threshold value for any field:
a.
b.
1-50
Figure 1-66 Set Field Thresholds
Figure 1-67 Set Field Thresholds Window
Click in the Threshold field.
Enter a new threshold value.
(Figure 1-66).
(Figure 1-67)
D000101-000 E