Fabric Manager Control; Accessing The Subnet Manager Control Window; Post Diagnostics Results Output; Subnet Manager Control Button - Qlogic 12000 Series User Manual

Figure 1-93 Post Diagnostics Results Output

Fabric Manager Control

This section assumes the user has purchased and activated the embedded
version of the Fabric Manager.

Accessing the Subnet Manager Control Window

The Subnet Manager Control window presents status information relating to the
Fabric Manager and provides a mechanism for starting, restarting, and stopping
the Fabric Manager
1. From the Management Module menu, click Subnet Manager
The Control button is displayed
Figure 1-94 Subnet Manager Control Button
2. Click Control.
The Subnet Manager Control window is displayed
Figure 1-95 Subnet Manager Control Window
3. To start the Fabric Manager, click Start.
D000101-000 E
.
(Figure
1–Operations and Administration
Configuration and Monitoring Features
1-94).
(Figure 1-95).
1-67