Qlogic 12000 Series User Manual page 40

1–Operations and Administration
Configuration and Monitoring Features
The Apply button applies the current settings to either the SNMP Target
Addresses or SNMP Target Parameters section. The Add button saves
changes made to the SNMP Address Form section.
NOTE:
The Target Configuration window is used for viewing and modifying
existing SNMP target entries. It is not used for creating new target entries.
To create a new target entry, use the following CLI command:
snmpTargetAddr add -n name -a addr [-p port] [-t timeout] [-r
retry_count] [-l tag_list] [-v parameters] [-s storage_type]
For example:
To add a trap target with the IP address 192.168.0.123 that accepts SNMP
v2c style traps:
snmpTargetAddr add -n traphost1 -a 192.168.0.123 -v "v2
params"
Or, to add the same target except using SNMP v1 traps:
snmpTargetAddr add -n traphost1 -a 192.168.0.123 -v "v1
params"
Target Configuration Window Field Descriptions
descriptions for each field in the Target Configuration window:
SNMP Target Addresses:
Address Name
Specifies a unique, administrator-defined name the system uses to identify a
row.
Transport Domain
Specifies the transport type of the address contained in the
snmpTargetAddrTAddress object (e.g., 1.3.6.1.6.1.1 = udp,
1.3.6.1.4.1.1977.200.1 = tcp).
Transport Address
Specifies the IP address in dotted decimal format.
NOTE:
1-28
The combination of the Transport Domain and the Transport Address
determines the trap destination.
The following are
D000101-000 E