Time Service - Ntp Setup; Time Service - Manual Setup - Qlogic 12000 Series User Manual

To use NTP:
1. Click the Use Network Time Protocol? check box
2. Enter either the DNS host name or IP address for the NTP server.
3. To save, click on Apply.
To manually set the system time:
1. Make sure the Use Network Time Protocol? check box is unchecked
(Figure
D000101-000 E
Figure 1-73 Time Service - NTP Setup
1-74).
Figure 1-74 Time Service - Manual Setup
1–Operations and Administration
Configuration and Monitoring Features
(Figure 1-73).
1-57