Chassis Traps; Subnet Manager Configuration File Window; Chassis Trap Control - Qlogic 12000 Series User Manual

1–Operations and Administration
Configuration and Monitoring Features
Figure 1-57 Subnet Manager Configuration File Window
3. In the Upload Config File text box: enter the path to the alternate embedded
subnet manager file (qlogic_fm.xml). If the path is not known, the user
can use the Browse... button to locate it.
4. Once the new file is located, click the Upload button.
5. In the Subnet Manager Control window for the master subnet manager,
click Stop, Refresh, then Restart to have the new file become active.
6. If applicable in the Subnet Manager Control window for the slave subnet
manager, click Refresh to have the new file become active.

Chassis Traps

The Chassis Trap Control window allows the user to set default trap scenarios
related to the switch.
1. From the Chassis menu, select Chassis Traps.
The Trap Control button is displayed
2. Click Trap Control.
The Chassis Trap Control window is displayed
1-40
Figure 1-58 Chassis Trap Control
(Figure 1-60).
(Figure 1-59).
D000101-000 E