Http/Cli Session Configuration; Ldap Authentication Window; Http/Cli Session Config Button - Qlogic 12000 Series User Manual

1–Operations and Administration
Configuration and Monitoring Features
3. In the LDAP Server IP Address box, enter the address of the applicable
LDAP server.
4. In the LDAP Server Port box, enter the applicable server port number (the
default is 389).
5. Click Apply.

HTTP/CLI Session Configuration

The hyper text transfer protocol (HTTP) and command line interface (CLI) session
configuration feature allows the user to set HTTP and CLI session time out
parameters, as well as set security requirements for the switch.
The session time out duration is the length of time that a session remains active if
there is no GUI activity. If a session is inactive for a time exceeding the time out
duration, the user will be logged out.
To modify the HTTP and CLI configurations:
1. From the menu, select Maintenance.
The HTTP/CLI Session Config button is displayed
Figure 1-35 HTTP/CLI Session Config Button
2. Click HTTP/CLI Session Config.
The HTTP/CLI Session Configuration window is displayed
1-24
Figure 1-34 LDAP Authentication Window
(Figure 1-35).
(Figure 1-36).
D000101-000 E