Http/Cli Session Configuration Window; User Authentication Dropdown List - Qlogic 12000 Series User Manual

Figure 1-36 HTTP/CLI Session Configuration Window
3. To modify the session time out duration (in seconds), click on the existing
configuration. The row changes to orange.
4. In the HTTP Timeout Duration field, enter the new timeout duration (in
seconds). The default is 0 seconds (i.e., no timeout).
5. In the CLI Timeout Duration field, enter the new timeout duration (in
seconds). The default is 600 seconds.
6. To change the User Authentication parameter, click on the User
Authentication list
Figure 1-37 User Authentication Dropdown List
7. Select the preferred user authentication method. These are:
8. To change the HTTP Mode parameter, click on the HTTP Mode list
(Figure
D000101-000 E
(Figure 1-37).
Login Enabled - UserName and Password must be entered, and must
match what is in the database of the local switch.
User Only Required - According to the local switch database, a valid
username must be entered. A password is not required.
Login Disabled - Does not require username or password.
LDAP - use an LDAP server. If the user name/password validation fails
to complete successfully, check in the database of the local switch.
1-38).
1–Operations and Administration
Configuration and Monitoring Features
1-25