Configuration File Trap Control Window - Qlogic 12000 Series User Manual

1–Operations and Administration
Configuration and Monitoring Features
The Trap Control window is displayed
Figure 1-55 Configuration File Trap Control Window
3. Select or deselect the desired trap(s).
NOTE:
4. To save settings, click on Apply.
NOTE:
Following are definitions for each configuration file trap:
CfgSrvBackupFailed
The server was instructed to backup a file for a particular slot, which failed.
CfgSrvSyncError
Synchronization to the slave Management Module failed. The problem
should be resolved and attempted manually.
CfgSrvGenError
A general error has occurred.
CfgSrvFileRestored
The configuration files have been restored to a particular slot.
CfgSrvFileBackedup
The configuration files have been successfully backed up for a particular
slot.
CfgSrvModeDisabled
1-38
To generate an immediate trap, click the applicable Gen Trap button.
If not selected, the Gen Trap button will not generate a trap.
(Figure 1-55).
D000101-000 E